Consent

This site uses third party services that need your consent. Learn more

Skip to content
Aircon Adviser
Daikin

Comfora FTXP-N

★★★★★ ★★★★★ 4.2

2.0 to 7.1 kW · A++ cooling · from 19 dB(A) · R32

Where to buy
  • AAC Air Conditioning from £1,825

    supplied & fitted, 3.5 kW single split (standard install)

    View deal
  • AAC Air Conditioning from £2,580

    supplied & fitted, 7.1 kW single split (standard install)

    View deal

Prices last checked recently and may have changed. We may earn a commission on purchases — it never affects our ratings.

Our verdict

The Comfora FTXP-N is Daikin's mid-range wall-mounted split and the most rational rung on the company's ladder for most rooms. It carries an A++ cooling label on every one of its six sizes, heats down to -15°C outside with a SCOP of up to 4.65, and matches the flagship Perfera's 19 dB(A) silent-mode floor on the smaller sizes, so it is genuinely bedroom-quiet. Wi-Fi control through the Onecta app comes as standard, and 3D airflow plus a silver allergen filter lift it clearly above the entry-level Sensira.

What you give up against the Perfera is Flash Streamer air purification, the occupancy sensors and the top efficiency figures, and the gap widens on the 6.0 and 7.1 kW sizes, where the Comfora slips to an A+ heating label. Supplied and fitted at roughly £1,300 to £1,900 for the popular sizes, it usually undercuts a like-for-like Perfera by £200 to £400, and at that gap it is the value pick of the range. Some installers price the two within £200 of each other, though, and at that point the Perfera is the better buy, so get quotes for both before you sign.

The basics

What the Comfora FTXP-N is and who it suits

The Comfora is a wall-mounted R32 split system: an FTXP-N indoor unit paired with an RXP-N outdoor condenser, or an indoor unit running on a Daikin 2MXM or 3MXM multi-split outdoor unit that serves several rooms. R32 is the lower-impact refrigerant now standard on quality splits, and any work on the sealed circuit has to be done by an F-Gas certified engineer, so this is a fitted product, not a DIY one. Wi-Fi comes as standard on every size: built into the 2.0 to 5.0 kW units (sold as the N9 versions) and via an adaptor included in the box on the 6.0 and 7.1 kW.

It sits in the middle of Daikin's wall-mounted range: above the entry-level Sensira, which it beats on efficiency, noise and features, and below the high-efficiency Perfera. You get 3D airflow (vertical and horizontal auto-swing), a silver allergen and air-purifying filter, a titanium apatite deodorising filter, and econo, powerful and night set modes. One thing to be clear on, because it is often got wrong: unlike the Perfera, there is no Flash Streamer air purification and there are no occupancy sensors. Those are the main reasons, along with the top efficiency figures, to pay the Perfera premium.

It comes in six cooling sizes, 2.0, 2.5, 3.5, 5.0, 6.0 and 7.1 kW, so one range covers a box room through to a large open-plan space, although there is no 4.2 kW class, so a room that falls between the 3.5 and 5.0 kW bands has to take the bigger unit. It suits anyone who wants the Daikin name, reliability and near-Perfera quietness on a tighter budget, and who can live without the air-quality headline features.

Full specifications

System type
Wall-mounted single split (also runs on Daikin 2MXM/3MXM multi-split outdoor units)
Indoor / outdoor units
FTXP-N indoor with RXP-N outdoor
Cooling capacities
2.0, 2.5, 3.5, 5.0, 6.0 and 7.1 kW (no 4.2 kW class)
Heating capacities
2.5 to 8.2 kW, operating down to -15°C outside
Efficiency
SEER 7.20 to 7.30, A++ cooling on every size; SCOP up to 4.65, A++ heating on the 2.0 to 3.5 kW sizes, A+ above
Refrigerant
R32 (GWP 675)
Indoor noise
From 19 dB(A) in silent mode (2.0 and 2.5 kW sizes)
Air quality
Silver allergen and air-purifying filter plus titanium apatite deodorising filter
Smart control
Wi-Fi as standard via the Onecta app, with Alexa and Google Assistant
Warranty
2 years standard, up to 7 with registration, accredited installation and annual servicing

Pros

  • +A++ cooling label on every size and SCOP up to 4.65, clearly more efficient than the entry-level Sensira
  • +Matches the Perfera's 19 dB(A) silent-mode floor on the 2.0 and 2.5 kW sizes, quiet enough for a bedroom
  • +3D airflow, a silver allergen filter and Onecta app Wi-Fi as standard, comfort features the Sensira lacks
  • +Typically £200 to £400 cheaper supplied and fitted than a like-for-like Perfera

Cons

  • No Flash Streamer air purification or occupancy sensors; those remain Perfera-and-above features
  • Efficiency tails off on the 6.0 and 7.1 kW sizes (SEER 6.82 and 6.20, A+ heating), where the Perfera pulls ahead
  • Some installers price it within £200 of a Perfera, which undercuts its value case
  • No 4.2 kW size, so rooms that fall between the 3.5 and 5.0 kW bands have to jump up a size

What it costs to buy and run

The Comfora is priced supplied and fitted, so you work from a quote rather than a shelf price. Real fixed prices from one UK installer put the 3.5 kW at £1,825 on a standard 3 to 5 metre pipe run, £1,899 for a 6 to 10 metre run, and the 7.1 kW from £2,580. Budget-tier Daikin installs in London start around £1,350 to £1,700, and independent estimates for a 3.5 kW install cluster between £1,200 and £1,800. As a working range, expect roughly £1,300 to £1,900 supplied and fitted for the popular 2.5 and 3.5 kW sizes, typically £300 to £500 above a like-for-like Sensira and £200 to £400 below a Perfera. The unit itself is only £500 to £1,000 of that; the rest is the professional installation the law requires. Always work from two or three live quotes for your own home rather than a headline figure.

Running costs are low. At the July 2026 Ofgem price cap unit rate of 26.11p per kWh, a 3.5 kW Comfora cooling flat out draws roughly 1 kW, so about 26p an hour, dropping to a few pence once the room is at temperature and the inverter modulates down; Daikin's own label figure for a typical cooling season on that size works out at around £44 a year. In heating, a SCOP of 4.64 on the 3.5 kW means about four and a half units of heat for every unit of electricity, far cheaper than a plug-in heater delivering the same warmth. As a reverse-cycle air-to-air heat pump it may qualify for the £2,500 Boiler Upgrade Scheme grant in England and Wales, but only if it replaces a fossil-fuel heating system and is fitted by an MCS-certified installer; comfort cooling added alongside a gas boiler does not qualify, and it is separate from the larger £7,500 air-to-water grant. Prices and rates correct as of August 2026; the energy price cap changes quarterly, so check current rates before budgeting.

Daikin Comfora: your questions answered

Is the Daikin Comfora any good? +

Yes, and it is arguably the most sensible buy in the Daikin wall-split range. It holds an A++ cooling label on every size, runs from a bedroom-quiet 19 dB(A) on the smaller units and comes with Wi-Fi, 3D airflow and an allergen filter as standard, for meaningfully less than the flagship Perfera. Its limits are the missing Flash Streamer purification and sensors, and weaker efficiency on the two largest sizes. One honest caveat: because it is a professionally fitted system, real owner reviews for this exact model are scarce, so long-term reliability evidence is the Daikin brand record rather than model-specific.

Daikin Comfora vs Perfera: which should I buy? +

Price both and let the gap decide. The Perfera adds Flash Streamer air purification, occupancy sensors and class-leading efficiency (SEER up to 8.65 and SCOP 5.10 against the Comfora's 7.30 and 4.65), and its advantage grows on the 6.0 and 7.1 kW sizes. If your quotes land £400 or more apart, the Comfora is the value pick; within about £200, the Perfera is usually worth the extra, especially for larger rooms, allergy sufferers or heavy heating use.

Is the Comfora quiet enough for a bedroom? +

The 2.0 and 2.5 kW sizes run from 19 dB(A) in silent mode, the same floor as the Perfera and about as quiet as a wall split gets; that is below a whisper and fine for sleeping. The bigger units are louder, with silent-mode floors rising to around 27 to 32 dB(A) on the 5.0 to 7.1 kW sizes, so for a bedroom stick to the small classes and use the night set and silent modes.

Does the Daikin Comfora have Wi-Fi built in? +

Every size gets Wi-Fi control through the Onecta app, with Amazon Alexa and Google Assistant voice control. On the 2.0 to 5.0 kW units (the N9 versions) it is built in; the 6.0 and 7.1 kW use a Wi-Fi adaptor that comes in the box, so nothing extra to buy either way.

How much does a Daikin Comfora cost supplied and fitted? +

Budget roughly £1,300 to £1,900 for the popular 2.5 and 3.5 kW sizes on a standard single-room install, rising to £2,600 or more at 7.1 kW, with real installer prices from £1,825 for the 3.5 kW. Longer pipe runs, high-level outdoor units and multi-split setups cost more. As a fitted product the only accurate figure is a quote, so get two or three from local F-Gas registered installers, and price the Perfera at the same time to see the real gap. Prices correct as of August 2026.

Can I get the £2,500 grant for a Daikin Comfora? +

Only in specific circumstances. From 28 April 2026 a £2,500 Boiler Upgrade Scheme grant for air-to-air heat pumps applies in England and Wales, but the unit must heat as well as cool, replace a fossil-fuel heating system and be fitted by an MCS-certified installer. The Comfora is reverse-cycle so it heats and cools, but adding one purely for comfort cooling alongside a gas boiler does not qualify. It is separate from the £7,500 air-to-water grant. Check GOV.UK and Ofgem for the current rules before relying on it.

Thinking about a Daikin Comfora installation?

Compare accredited air conditioning installers near you and get quotes for a Daikin Comfora fitted in your home.

We may earn a commission when you buy through links on this page. This never affects our ratings or which products we recommend. How we make money.