Consent

This site uses third party services that need your consent. Learn more

Skip to content
Aircon Adviser
Daikin

Perfera FTXM-A

★★★★★ ★★★★★ 4.5

2.0–7.1 kW · up to A+++ · from 19 dB(A) · R32

Where to buy
  • AAC Air Conditioning from £2,034

    supplied & fitted, 3.5 kW single split (standard install)

    View deal
  • AAC Air Conditioning from £2,375

    supplied & fitted, 6.0 kW single split (standard install)

    View deal

Prices last checked recently and may have changed. We may earn a commission on purchases — it never affects our ratings.

Our verdict

The Perfera FTXM-A is Daikin's high-efficiency all-rounder, and it is the wall-mounted split we would point most homes towards unless a designer fascia is the priority. It spans the widest size range in Daikin's comfort line, 2.0 to 7.1 kW, so one model covers a small bedroom through to a large open-plan space. It also posts class-leading efficiency, up to SEER 8.65 in cooling and SCOP 5.10 in heating, with an A+++ label in both on the smaller sizes, and it runs down to a genuinely bedroom-quiet 19 dB(A). Flash Streamer air purification and Wi-Fi through the Onecta app come as standard.

What you give up is styling. It is a plain white box rather than a design statement, and like any fixed split it is supplied and fitted by an F-Gas certified engineer rather than bought and plugged in, so you work from a quote rather than a shelf price. For most homes that is an easy trade: you get all but a sliver of the performance of the pricier Emura and Stylish for less money. If the look of the indoor unit matters more to you than value, those designer models are worth a look; for everyone else, the Perfera is the sensible premium choice.

The basics

What the Perfera FTXM-A is and who it suits

The Perfera is a wall-mounted R32 split system: an FTXM-A indoor unit paired with an RXM-A outdoor condenser, or an indoor unit running on a Daikin multi-split outdoor unit that serves several rooms. R32 is the lower-impact refrigerant now standard on quality splits, and any work on the sealed circuit has to be done by an F-Gas certified engineer, so this is a fitted product, not a DIY one. A floor-standing version, the FVXM-A, is also sold for spots under a window where a wall unit will not go.

It sits at the top of Daikin's comfort range on performance while staying below the designer Emura and Stylish on price. Its seasonal efficiency ratings, SEER for cooling and SCOP for heating, are among the best of any home split, and it holds an A+++ energy label in both cooling and heating on the smaller capacities. Add Flash Streamer air purification, which uses electrons to break down allergens and odours, a titanium apatite deodorising filter and Wi-Fi as standard, and you have the unit most installers reach for when looks are not the deciding factor.

It comes in six cooling sizes, 2.0, 2.5, 3.5, 5.0, 6.0 and 7.1 kW, the widest spread of Daikin's comfort splits, so one range covers a box room through to a large open-plan living space. It suits anyone who wants near-flagship comfort, low running costs and clean air without paying the designer premium, and who is happy with a discreet plain white unit on the wall.

Full specifications

System type
Wall-mounted single split (multi-split capable); floor-standing FVXM-A also sold
Indoor / outdoor units
FTXM-A indoor with RXM-A outdoor
Cooling capacities
2.0, 2.5, 3.5, 5.0, 6.0 and 7.1 kW
Efficiency
Up to SEER 8.65 / SCOP 5.10, A+++ cooling and heating on the smaller sizes
Refrigerant
R32 (GWP 675)
Indoor noise
From 19 dB(A)
Air quality
Flash Streamer air purification and titanium apatite deodorising filter
Smart control
Wi-Fi as standard via the Onecta app
Warranty
2 years standard, up to 7 with registration and accredited installation

Pros

  • +Widest size range of the Daikin comfort splits, 2.0 to 7.1 kW, so one model suits almost any room
  • +Class-leading efficiency, up to SEER 8.65 and SCOP 5.10, A+++ in both cooling and heating on the smaller sizes
  • +Genuinely quiet from 19 dB(A) indoors, with Flash Streamer air purification and Wi-Fi as standard
  • +Better value than the designer Emura and Stylish for near enough the same performance

Cons

  • Plain white styling, so it is a poor fit if you want the indoor unit to be a design feature
  • Fitted-only through an F-Gas engineer, so no quick self-install and prices are quote-based
  • The headline up-to-7-year warranty is conditional on registration, accredited install and annual servicing
  • Air-to-air, so it only qualifies for the £2,500 grant if it replaces fossil-fuel heating

What it costs to buy and run

The Perfera is priced supplied and fitted, so there is no single shelf price. As a guide, a standard single-room install of a common size runs from roughly £2,000 to £2,400. Real fixed prices from one UK installer put the 3.5 kW at around £2,034, the 5.0 kW at about £2,306 and the 6.0 kW near £2,375 on a standard 3 to 5 metre pipe run, with more for longer runs, high-level work or a multi-split setup. Costco UK and many accredited installers also sell fixed-price installed packages across the 2.0 to 7.1 kW range. Always work from two or three live quotes for your own home rather than a headline figure.

Running costs are low for the comfort on offer. At the July 2026 Ofgem price cap unit rate of 26.11p per kWh, a 3.5 kW unit cooling flat out draws roughly 0.8 to 1 kW, so about 21p to 26p an hour, dropping to a few pence once the room is at temperature and the unit modulates down. In heating the high SCOP means it returns around five units of heat for every unit of electricity on the smaller sizes, far cheaper than a plug-in heater delivering the same warmth. As a reverse-cycle air-to-air heat pump it may qualify for the £2,500 Boiler Upgrade Scheme grant in England and Wales, but only if it replaces a fossil-fuel heating system and is fitted by an MCS-certified installer; comfort cooling added alongside a gas boiler does not qualify, and it is separate from the larger £7,500 air-to-water grant. Prices and rates correct as of July 2026; the energy price cap changes quarterly, so check current rates before budgeting.

Daikin Perfera: your questions answered

Is the Daikin Perfera any good? +

Yes. It is one of the strongest wall-mounted splits you can buy for a UK home, pairing class-leading efficiency, up to SEER 8.65 and SCOP 5.10 with an A+++ label in both cooling and heating on the smaller sizes, with quiet running from 19 dB(A) and Daikin's reliable engineering. The main reason not to choose it is styling: it is a plain white unit rather than a design feature, so if the look of the indoor unit matters, the Emura or Stylish suit better.

Daikin Perfera vs Stylish and Emura: which should I pick? +

Performance is close across all three, so it comes down to looks and budget. The Emura and Stylish are Daikin's designer units with sculpted fascias and a price to match. The Perfera gives you all but a sliver of the same efficiency and comfort in a plain white box for less money. Choose the Perfera unless the appearance of the indoor unit genuinely matters in the room.

How does the Perfera compare with the Sensira and Comfora? +

The Sensira is Daikin's entry-level split and the Comfora sits in the middle; the Perfera is the top of the comfort range, just below the designer models. Moving up to the Perfera buys higher efficiency, lower noise, Flash Streamer air purification and Wi-Fi as standard. If you want Daikin quality on a tighter budget the Sensira or Comfora will do, but the Perfera is the one to have if running costs and air quality matter.

What sizes does the Perfera come in and which do I need? +

The wall unit comes in 2.0, 2.5, 3.5, 5.0, 6.0 and 7.1 kW, the widest spread of Daikin's comfort splits. As a rough guide, 2.0 to 2.5 kW suits a bedroom or small office, 3.5 kW an average living room, and 5.0 kW and up larger or open-plan spaces. A proper heat-load calculation from your installer is more reliable than floor area alone, because glazing, insulation and which way the room faces all change the answer.

How much does a Daikin Perfera cost supplied and fitted? +

Budget from roughly £2,000 to £2,400 for a common size on a standard single-room install, with real installer prices starting near £2,034 for the 3.5 kW. Longer pipe runs, high-level work, larger capacities and multi-split setups cost more. As it is a fitted product the only accurate figure is a quote, so get two or three from local F-Gas registered installers before you budget.

Can I get the £2,500 grant for a Daikin Perfera? +

Only in specific circumstances. From 28 April 2026 a £2,500 Boiler Upgrade Scheme grant for air-to-air heat pumps applies in England and Wales, but the unit must heat as well as cool, replace a fossil-fuel heating system and be fitted by an MCS-certified installer. The Perfera is reverse-cycle so it heats and cools, but adding one purely for comfort cooling alongside a gas boiler does not qualify. It is separate from the £7,500 air-to-water grant. Check GOV.UK and Ofgem for the current rules before relying on it.

Thinking about a Daikin Perfera installation?

Compare accredited air conditioning installers near you and get quotes for a Daikin Perfera fitted in your home.

We may earn a commission when you buy through links on this page. This never affects our ratings or which products we recommend. How we make money.